Aggregate Handling SOLUTIONS
Moving sand, gravel, and crushed aggregate on screens, stackers, and heavy washing conveyors.
Aggregate Handling Guide
The Material Handling Problem
Fine aggregate slurry and wet sand cause high-friction scraping wear, while stockpile climbing requires steeper inclines where material would slide off standard flat belts.
The Norvic Engineering Solution
We configure specialized cover parameters to resist sliding, tearing, or thermal oxidation under active environments: Constant water and moisture spray from aggregate washing, Incline angles up to 25-35 degrees on radial stacking conveyors, Frequent stop-start cycles under heavy portable weight load.
Crucial Engineering Guidelines
Implementing Aggregate Handling setups demands strict compliance with mechanical limits. Exceeding recommended pulley diameters, tension ratios, or troughing angles leads to structural belt fatigue and seam failure.
Recommended Characteristic
Molded chevron rib profile (V-open or V-closed cleat styles)
Recommended Characteristic
Sealed edge plies to prevent moisture delamination
Recommended Characteristic
Good low-temperature flexibility
Procurement Advisory
For specialized applications, our custom vulcanizing technicians closely collaborate with your maintenance team. We specify fabric plies, safety cover grades, and splicing compounds.